ML
Mac L.
Verified buyer · UK
★★★★★
As a kitchen and wardrobe fitter for 40 years these lifters are game changing.
4.8/5
1,809+ Verified Reviews
L45 PRO | The Lift-It-Alone Full Kit
L45 PRO | The Lift-It-Alone Full Kit
⚡ TODAY’S OFFER + 3 FREE BONUSES
- L45 PRO Pro Twin Pack Lift doors and worktops on your own −50%
- No-pinch grip gloves Protect your hands on every lift £14.90 FREE
- “No More Back Pain” ebook Simple tips for safer lifting £9.90 FREE
- 5-Year Replacement Guarantee Covers wear, breakage and defects £19.90 FREE
Low stock
Couldn't load pickup availability
Limited-time discount auto-applied
Estimated delivery: 3 Sep – 7 Sep
Specifications
Specifications
Support height: 38–60 cm
Steel base: 3 mm all-steel (45#), 10.2 × 10.8 cm
Rail: 5 mm heat-treated, graduated markings
Weight: 1.2 kg per lifter
Springs: stainless waveform
Minimum gap needed: a few millimetres
In the box: 2 × lifting jacks · 2 × support frames · 2 × F-clip sets · 2 × foot-pad sets · no-pinch grip gloves · “No More Back Pain” ebook
Not for: lifting people or vehicles. For long or unbalanced loads (worktops, doors) always use both lifters, one at each end.
Included in the box
Included in the box
EVERYTHING YOU NEED
Nothing extra to order, no adaptors to hunt down. Open it and you can start the job the same afternoon — plus two free extras.
- The full kit: 2 × lifting jacks, 2 × support frames, 2 × F-clip sets, 2 × foot-pad sets.
- Free no-pinch grip gloves: proper protection from the very first lift — worth £14.90.
- Free ebook, “No More Back Pain” by Barry Harford: smart lifting hacks, downloadable the moment you order.
+1,800 satisfied customers
What do our customers say?
JM
Jonathan M.
Verified buyer · UK
★★★★★
This tool has been a blessing. I managed to lift my king-size bed to put a rug underneath without hurting myself. My back usually suffers after these jobs, but this time it was effortless.
JA
Jim A.
Verified buyer · UK
★★★★★
This is my second order because the first was great and i realized i needed another pair. Thank you.
EB
Emily B.
Verified buyer · UK
★★★★★
The size is appropriate and it seems to be useful. It works well too. However, there is no protection on the handle, so if done incorrectly, it might pinch the palm so be careful
THE SECOND PAIR OF HANDS THAT ALWAYS TURNS UP
Pump the trigger and the load climbs, click by click, up to your mark. Then it locks — and both your hands go back to the drill.
✅ Locks under its own load: the weight of what you’re lifting drives the pawl deeper into the teeth. It cannot let go on you.
✅ Hands completely free: level it, shim it, drive the fixings. Nothing left to hold.
✅ No favours owed: no waiting on a mate who said they’d come Saturday and didn’t.
YOUR BACK WAS NEVER MEANT TO BE A CLAMP
Holding 40 kg at chest height while you fish about for a screw is how a Saturday ends in ibuprofen. Let the lever take it instead.
- Secateur-light grip: one hand pumps it. Owners with arthritis use these daily.
- No more ladder gymnastics: the lifters carry the unit from the worktop below while you level it and fix it.
- Two ends, two lifters: a worktop has two ends — the twin pack covers both, so nothing tips.
BUILT WHERE THE £20 ONES BREAK
We bought the cheap ones first. They bent, they rusted, and one of them dropped a panel. Here is exactly what we changed.
- All steel, no hidden plastic: 3 mm steel base and a 5 mm heat-treated graduated rail. Handles that look like metal because they are.
- GravityLock™ ratchet: the heavier the load, the tighter the lock. It cannot free-fall.
- Two-speed controlled descent: come down a single millimetre to hit your line. No dropping, no chipped worktops.
One tool. Three jobs.
Lift it, prop it, or flip it into a clamp
The same pair covers most of what normally needs a second person.
Lift — raise panels, tiles and worktops
Slide the plate under, squeeze, and the load rises click by click to your line — then it locks there. Both hands free to screw, tile or shim.
wall panels · floor & wall tiles · worktops · skirting
Support — hang wall units on your own
Fit the support frame and you have a pair of props that never get tired: they carry the unit from the worktop below while you level it and drive the fixings.
kitchen wall units · wardrobes · shelving · radiators
Clamp — clamp, spread and hold
Flip the F-clip on and it becomes a clamp with a whole lever behind it — glue-ups, spreading a stubborn frame, holding timber steady while you cut.
glue-ups · frames & studs · door linings · spreading
EVERYTHING YOU NEED — FROM THE MOMENT THE BOX LANDS
Nothing extra to order, no adaptors to hunt down. Open it and you can start the job the same afternoon — plus two free extras.
- The full kit: 2 × lifting jacks, 2 × support frames, 2 × F-clip sets, 2 × foot-pad sets.
- Free no-pinch grip gloves: proper protection from the very first lift — worth £14.90.
- Free ebook, “No More Back Pain” by Barry Harford: smart lifting hacks, downloadable the moment you order.
The maths of the second man
A second pair of hands costs £200 a day. This pair costs £49.90, once.
A tradesman for the day runs £200–250. One door hung by a pro, £60–200. Even hiring a panel lift for a week is £42–85 plus a £200 deposit you have to get back.
The twin pack pays for itself on the first job — and it is still in your garage for the next one.
Sources: Checkatrade day rates 2025, HSS Hire.
Get the Twin Pack — £49.90They Talk About Us
The old way
With L45 PRO
‹ ›
Same job. Same one person.
One hand on the cabinet, one knee on the worktop, drill in your teeth — or two lifters holding it dead level while you drive the fixings. Drag the slider.
Will it bend like the £20 ones?
Bent forks are the number one complaint on cheap lifters. This one is all-steel: a 3 mm base and a 5 mm heat-treated rail. And if yours doesn’t do what we show it doing, the 90-day money-back sends it straight back to us.
Does it drop the load when I release it?
No. Descent is click by click on a two-speed release, so you can come down a single millimetre if that’s what the line needs. The load’s own weight drives the lock tighter — it can’t free-fall.
Do I need strong hands?
About as much grip as a pair of garden secateurs. The lever does the work, not you. Owners with arthritis use them daily.
Why a pair rather than one?
Because worktops have two ends. One lifter is fine for a washing machine or a radiator, but anything long or unbalanced needs one at each end so it can’t tip.
What if there's no gap underneath?
You need a few millimetres to slide the plate in. No gap at all? Flip the F-clip on and use it in clamp mode instead.
What can I actually use it for?
Kitchen wall units, wardrobes, doors, skirting, floor and wall tiles, worktops, radiators, shelving, decking frames, washing machines — and clamp mode for glue-ups, door linings and holding timber steady while you cut.
What is it not for?
Never for lifting people or vehicles. For long or unbalanced loads, always use both lifters, one at each end.
When will it arrive, and what if I change my mind?
Free UK delivery. Dispatched in 1–3 working days, then typically 7–14 working days to your door. Use it on one real job — if it wasn’t easier, faster and kinder on your back, return it within 90 days for a full refund.
Authenticity Guarantee :
We would like to draw your attention to the presence of numerous counterfeit items online.
We guarantee the authenticity of our RYDA products, as they are the only ones of superior quality. To ensure you receive an authentic model, we encourage you to order only from the official website (ryda-uk.com)
